Polishing machine is a widely used equipment. With the continuous improvement of science and technology, fully automatic polishing machine equipment has brought great convenience to production. There are many problems that need to be paid attention to in the use of automatic polishing machine. Dongguan xinmeisheng machinery manufacturer will give you a specific explanation

The following problems should be paid attention to during the use of automatic polishing machine:

1. Before polishing the product, carefully check the paint surface of the product to understand the specific conditions such as the size of paint scratch, damage degree, paint thickness and wear resistance, and select different grinding discs and abrasives according to different conditions

2. Since the water-based abrasive cannot cover the small flower marks, the grinding plate shall be in contact with the paint surface as much as possible during grinding. If the abrasive is burned dry and attached to the paint surface, pay attention to spraying a small amount of water on the grinding plate before grinding

3. Although oily Abrasives can cover small flower marks to prevent the abrasives from drying and adhering to the paint surface, they should be degreased with degreasing water after grinding, and then they can be used as crystal plating and coating products. Otherwise, the crystal plating and coating can not be well attached to the paint surface and are easy to be cleaned

For the selection of abrasives, fine sponge ball combined with fine abrasives can be selected for minor scratches, coarse sponge ball combined with medium Abrasives can be selected for moderate scratches, and wool disc combined with coarse Abrasives can be used for polishing if the paint scratch is relatively large

The above technology introduces the problems needing attention in the use of automatic polishing machine. I hope the above content can help you