Stainless steel wire drawing machine is mainly used for metal surface treatment. The machine adopts physical properties, so that the performance of the workpiece is not changed while polishing. For stainless steel wire drawing machine, the following requirements shall be met during installation and use:

1. The installation foundation of stainless steel wire drawing machine shall be fixed firmly to avoid vibration.

2. Before starting the machine, check the air supply and circuit of the stainless steel wire drawing machine to see if there is air leakage and ponding. The abrasive belt of the stainless steel wire drawing machine shall be installed correctly, and the lubrication degree of the lifting lead screw of the upper and lower shafts shall be tested to ensure that there is no one on the discharge, and then the machine can be started.

3. Avoid frequent start-up and shutdown during use, which will affect the drawing effect and increase the wear of the drawing die.

4. In the process of using stainless steel wire drawing machine, operators shall not leave their posts at will to avoid accidents.

5. When working on stainless steel wire drawing machine, you must wear gloves, because the workpiece will produce high temperature during wire drawing, which can prevent the finger of the workpiece from being burned and avoid affecting the surface quality of the product.

6. The stainless steel wire drawing machine should be cleaned and maintained regularly, which can not only reduce faults, but also prolong the service life of the machine.

Stainless steel wire drawing machine manufacturers choose Dongguan xinmeisheng machinery. Xinmeisheng machinery is committed to the automation of metal surface treatment. It specializes in manufacturing polishing machine, wire drawing machine, sanding machine, abrasive belt machine and other equipment. At present, it can provide automatic wire drawing machine, plane wire drawing machine, triangular wire drawing machine, water grinding wire drawing machine, stainless steel wire drawing machine, nylon wheel wire drawing machine and other equipment. Welcome to consult.